586,655 active members*
3,421 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Ultimax3 Disk Failed

Thread: Ultimax3 Disk Failed

Results 1 to 4 of 4
  1. 05-28-2008, 05:27 PM #1
    musnar
    musnar is offline Registered
    Join Date
    May 2008
    Posts
    10

    Ultimax3 Disk Failed

    hi all,

    My machine Hurco BMC-30 ultimax3 (1994)

    error message: >> disk sub-system failed to initialize

    What must i do..
    Reply With Quote Reply With Quote
  2. 06-04-2008, 01:41 AM #2
    RON MEYER
    RON MEYER is offline Registered
    Join Date
    Jan 2005
    Posts
    49

    drive subsystem

    this could be caused by a bad floppy, bad hd, or drive controller on the cpu. try a new floppy first. standard 1.44 floppy. make sure no one has had their hands in the console or card rack moving cables. if your machine has the original executive disks in the back cabinet, you can boot the machine off of those disks. the machine will not run at that point, but you can then go to auxillary and select the upgrade master. the disks can then be loaded as an upgrade. if the machine will not boot off of the executive disks, then one of the above is bad.

    ron meyer
    Reply With Quote Reply With Quote
  3. 06-22-2008, 04:26 PM #3
    bloke
    bloke is offline Member
    Join Date
    Jun 2008
    Posts
    1104
    Are you in Eskisehir?
    Reply With Quote Reply With Quote
  4. 07-06-2008, 06:59 PM #4
    musnar
    musnar is offline Registered
    Join Date
    May 2008
    Posts
    10
    Thank you, ron
    Im in istanbul, bloke

    epron .BIN file failed.. reloaded BIN file and it is resolved problem.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Tried to buy a HF X2 yesterday. Failed!
    By tooManyHobbies in forum Benchtop Machines
    Replies: 8
    Last Post: 03-12-2008, 12:00 AM
  2. BMC20-Ultimax3
    By stevieboy in forum HURCO
    Replies: 1
    Last Post: 08-28-2007, 10:49 PM
  3. X axis transistor failed...AGAIN
    By Mr. Technical in forum Bridgeport / Hardinge Mills
    Replies: 18
    Last Post: 08-22-2007, 12:16 AM
  4. Boolean difference failed
    By chetosmachine in forum Rhino 3D
    Replies: 8
    Last Post: 06-12-2007, 11:24 PM
  5. Failed transformers?
    By Jetlag in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 09-09-2005, 08:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules