[djgatton]

Just wondering if anyone has ever used Mach 3 with a touchscreen.

[ger21]

Lots of people do.

[Khalid]

What Mach3 version you are using Gerry?

[H.O]

Hi Khalid,
Yes, lots of touch-screen users out there. Which Mach3 version you use doesn't matter since Mach3 really doesn't know if you're using a touchscreen or not.

However, you may want to switch to another screen-set which is more "touch-screen friendly" (or design your own if you like) with a bit larger buttons etc. There are a few screens available in the download section on the Machsupport website.

[ger21]

I'm finishing up a "simple" screen with large buttons that should be very touch screen friendly. Should be done in a day or two. It's based on this one, but will have a single Z axis and sliders for the overrides.

http://www.cnczone.com/forums/showthread.php?t=59941

[GibbonsRock]

I use one too. I scored a 17" elo flatpanel touchscreen on Ebay for about $75. It's nice, but you need to take your time calibrating the sensitivity to your particular parallax.

Cheers! -Jim

[Kipper]

Anyone ever used Mach without?

When you finish it Gerry are you going to share? :stickpoke :cheers:

[ger21]

When you finish it Gerry are you going to share? :stickpoke :cheers:

http://www.cnczone.com/forums/showthread.php?t=61101

[Kipper]

http://www.cnczone.com/forums/showthread.php?t=61101

I saw it seconds after I posted :cheers: I'll give it a whirl this weekend Gerry