My 4020 chiller unit is not working. I checked the voltage and the plug shows 114 v but it does not turn on, but if I plug it into a regular plug it works. Could it be the transformer? I checked the F1 fuse and it was OK.
Thread: Chiller system problem
Results 1 to 3 of 3
-
07-11-2008, 04:05 PM #1
Registered
- Join Date
- Nov 2006
- Posts
- 35
Chiller system problem
-
07-13-2008, 08:20 AM #2
Registered
- Join Date
- Jan 2007
- Posts
- 1389
Your chiller is working fine. your thermostat may not me working or it might not get warm enough to kick it on. it doesnt run all the time.
However how do you know its not working? it only comes on when the spindle gets to a certain temp. you may have a cool running spindle, or you havent run it at high rpms.
one way to check is put a mark on the fan blade thats cools the condencer(its on the top) then check it at the end of the day to see if it moved.
-
07-15-2008, 04:07 PM #3
Registered
- Join Date
- Jul 2008
- Posts
- 7
Most of this spindle cooler system are controled by a pc board on the left side of de cpu,
there are 2 red lights and 2 little bottons,,depress one and check if the system started.
Reply With QuoteSimilar Threads
-
Water chiller not chilling
By apriorius in forum Laser Engraving / Cutting Machine General TopicsReplies: 17Last Post: 05-23-2014, 10:43 AM -
new system, new problem
By draughted in forum Mach Software (ArtSoft software)Replies: 9Last Post: 04-21-2008, 03:41 AM -
Got a 60hz chiller instead 50hz need help
By wickedboysap in forum Laser Engraving / Cutting Machine General TopicsReplies: 2Last Post: 04-18-2008, 06:28 AM -
Fadal 6030 spindle chiller
By 5th-axis in forum FadalReplies: 0Last Post: 10-24-2007, 12:55 PM -
Spindle Chiller Coolant
By furnman487 in forum FadalReplies: 3Last Post: 03-24-2006, 12:16 AM
Posting Permissions
