[blmmdes]

Hello Harold,

Please clarify...are you using the generic 4-axis post or its a customized one? Because i tried changing set mode>Circular but still my output is in linear moves.
Are you trying to say that i have work on my post processor to achieve this?

Thanks and Regards,

[weirdharold]

This is the data path to post I used; c: program files=UGS=NX5.0=Mach=resource=Postprocessor=wedm_4 axis_iso.pui . That is post I used to get code. Have a great day . Harold c

[blmmdes]

Thank you very much Harold, you made my day. I was unaware of a 4-axis wire post hidden in NX (since it was not appearing on my post dialog).
I will take forward from here. Thanks again.

[blmmdes]

Dear All,

Attached is a NX4 prt file and the nc output. After I modified my 4-axis wireedm post i am getting this output.

Just note the blocks in RED. why it is giving me 4 arc movements instaed of one. I mean after the liear movement

G01 X-35.84 Y40 G01 U-15.84 V20

cant i directly get

G03 X40. Y35.84 I0 J5 G03 U-20 V15.84 K0 L5

Normally programming directly on the machine follow this but whats wrong with NX4 or the post processor?

Please note my post is nothing but a copy of UG ISO wireedm post with upper plane letters changed to U, V, K and L.

Please advice.