After about 11 months, I finally was able to run a v22 program with absolutely no G-code edits.
Simple rectangular clearance pocket in a fixture. (on which I was running several v21 programs).
The differences:
1. Ramping in pocket. Made for quick, single tool operation, finally.
2. I was able to define my OWN speeds and feeds, finally.
3. I was able to SIMPLY call my own tool, finally.
4. Pocketing multiple depth option now includes a Defined Depth Step entry, instead of always dividing the steps evenly, so I was able to figure steps that left only .005 for the last pass, FINALLY.
I'm finding some issues as I explore the new update, but seems to be a step in the right direction.
moldmker