We are looking to purchase immediately a used Integrex 200 SY machine with 10,000rpm+ milling spindle and a minimum of 40 tool ATC (Capto or KM).

(Puma MX or Mori MT1500 or 2000 with sub spindle also considered)

The machine must be located in Europe and be available for immediate delivery.

Our budget would dictate that this would probably be a MK2 Fusion 640 machine.

Don’t need gantry system or anything special.

Any sensibly priced machines considered!

(eg. less than 150,000 EURO)

Due to CE marking and Mazak UK refusal to provide any support for non-CE marked machines we can’t consider machines from the Far East and USA.