[Terrestre]

Hi. It´s my first post here (a little bit nervous, hehe)

I lost the Machine Parameters on a old Matchmaker HG-700 vertical milling with an Heidenhain TNC 155 controller, because of dead batteries

Anybody has the MP´s file or list for this setup?

Thank you!

--Terrestre

[cam1]

Welcome!

Don't be afraid, we can bark but we cannot bite.

regards

[gridley51]

I`ve got a Matchmaker with a 155.Not sure what model the machine is as I only bought it a few weeks ago and have not really looked at it apart from taking a copy of the parameters out it.Mine is a retrofit and possibly yours is too.Mine has a toolchanger which complicates things a bit but if yours doesn`t you can download a set of generic parameters from the Heidenhain website and if you know what you are doing it`s quite easy to adapt them for a specific machine.

[Terrestre]

Thanks gridley51
Mine has a the letters HG-700 written in orange (or red?) in front of the gearbox.
No tool change
I am reverse-engineering some lists of Machine Params that I got for Bridgeport VMC´s
Anyway, I would like to have yours, they are probably more suited to my machine.
If it happens that you download them from the machine, could you send it to me?
email: a l d o m o t o @ g m a i l . c o m (no spaces, please)

Thanks!!
--Terrestre

[gridley51]

Mine doesn`t have a model number just a type name printed on the front and the machine manufacturer who I forget has a label on the column.I have the parameters written down and should be able to scan them but will be away for the next few days but will try and do it when I come back.I think Brreid who post about here has either an HG 700 or 800.
Mark.

[Terrestre]

Thanks gridley51
Here is the picture of the machine:
I am looking forward for your scan, take your time.

Thanks!
--Terrestre