Im getting huge flats on the OD of the Contour
with .001 tolerance filtering is tunrned off ...
I cut a Pocket in the same part with the same tolerance and its super smooth..
What did I miss ? is the model bad?
MC9 part
Results 1 to 6 of 6
Threaded View
-
08-08-2008, 10:29 PM #1
Registered
- Join Date
- May 2007
- Posts
- 155
2D Contour on a round OD not very round :(
Reply With QuoteSimilar Threads
-
A round bar question!!
By cyntanada in forum Mechanical Calculations/Engineering DesignReplies: 5Last Post: 02-24-2008, 03:23 PM -
Out of round on last cut
By Robin Hewitt in forum Benchtop MachinesReplies: 17Last Post: 08-18-2007, 01:20 AM -
round and round we go
By omegaghost in forum Benchtop MachinesReplies: 5Last Post: 01-10-2007, 05:25 PM -
Round Numbers
By stampman in forum FanucReplies: 4Last Post: 09-06-2006, 12:12 AM -
round ram head
By locoind in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 04-21-2006, 03:44 AM
Posting Permissions
