Hi everyone,
I've bought a KaVo 4061 spindle, without the frequency convertor drive needed to run it. I'm hoping somebody might be able to help me either find an affordable used drive, or a substitute that will do the trick. The factory recommended drive is the 4452, which I think has been superseded by the 4438.
The information I have says it is a 3 phase Asychronous motor, 220v, 7A, 83 - 833Hz. It seems a very nice spindle, so I'd really like to get it going.
Any help anyone could offer would be much appreciated!
Regards,
Jason