I am looking at two used Daewoo machines, one is a 1998 Daewoo 250 LB and the other is a Daewoo Puma 12L-B Does anyone here have any issues or expierence with either machine any and all input will be greatly appretiated.
I am looking at two used Daewoo machines, one is a 1998 Daewoo 250 LB and the other is a Daewoo Puma 12L-B Does anyone here have any issues or expierence with either machine any and all input will be greatly appretiated.
I've run them both and they are great machines. My preference is the Fanuc control.
That is, if they haven't been abused too badly!
I've had several years experience with 250's with Fanuc 18iT controls and found them to be very solid and reliable machines. Only issue i can recall was the interface board (behind the control panel) failing in 2 of them. Even then at the time we suspected it was from the operators slamming the door needlessly - some operaters don't seem to give a stuff about their machinery..........