[jhuddleston]

I am looking at two used Daewoo machines, one is a 1998 Daewoo 250 LB and the other is a Daewoo Puma 12L-B Does anyone here have any issues or expierence with either machine any and all input will be greatly appretiated.

[pappatop68]

I've run them both and they are great machines. My preference is the Fanuc control.

That is, if they haven't been abused too badly!

[ragman]

I've had several years experience with 250's with Fanuc 18iT controls and found them to be very solid and reliable machines. Only issue i can recall was the interface board (behind the control panel) failing in 2 of them. Even then at the time we suspected it was from the operators slamming the door needlessly - some operaters don't seem to give a stuff about their machinery..........