586,114 active members*
3,319 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Haas Machines > Haas Lathes > Haas TL-2 footprint w/ enclosure

Thread: Haas TL-2 footprint w/ enclosure

Results 1 to 3 of 3
  1. 08-22-2008, 03:29 PM #1
    GENMACH
    GENMACH is offline Registered
    Join Date
    Sep 2005
    Posts
    12

    Haas TL-2 footprint w/ enclosure

    What is the actual foot print of the TL-2 with the enclosure.Thanks.
    Reply With Quote Reply With Quote
  2. 08-22-2008, 03:54 PM #2
    Geof
    Geof is offline Gold Member
    Join Date
    Jul 2005
    Posts
    12177
    When you allow for the righthand sliding door to be fully open, the control cabinet door to be open and leave room for an operator standing in front of the machine you need about 10 feet by 10 feet.

    Just the machine with all doors closed and the control rotated parallel to the machine is about 8 feet by 6 feet.
    An open mind is a virtue...so long as all the common sense has not leaked out.
    Reply With Quote Reply With Quote
  3. 08-28-2008, 08:23 PM #3
    Wiseco
    Wiseco is offline Registered
    Join Date
    Jul 2005
    Posts
    181
    On our TL-2 we have removed hinge pins before putting the machine in place to be able to save some space. With this manner, when we must do something in the enclosure (which it happened 1 or 2 times in 3 years) we remove the door and we have just enough space for a man.

    And if let say we or a haas tech must do severe service in the enclosure, we will took our pallett truck to swing the machine to have more space.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. HAAS TM-1 Enclosure!!!
    By ChAlKbOaRd in forum Haas Mills
    Replies: 18
    Last Post: 03-07-2011, 11:53 PM
  2. mill (cnc) footprint / buying soon looking for opinions
    By topls64 in forum Benchtop Machines
    Replies: 12
    Last Post: 04-11-2008, 06:03 AM
  3. HF X2 mill (cnc) footprint
    By topls64 in forum Mini Lathe
    Replies: 2
    Last Post: 04-06-2008, 12:15 AM
  4. HAAS TM-1P Enclosure Lighting
    By HelicopterJohn in forum Haas Mills
    Replies: 2
    Last Post: 03-16-2008, 08:52 PM
  5. Guide versus Bush (footprint)
    By Chunky in forum Linear and Rotary Motion
    Replies: 4
    Last Post: 07-06-2005, 05:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules