[John999]

Hi everbody.
New boy on the block. Just built a Torchmate 2, router setup. Learning software. Problem with creating toolpath. When I turn off the "show tool path" then click and delete the the original everything disappears. Nothing there when I turn "tool path" back on.
What am i doing wrong?
John

[Mike@Torchmate]

Under the Options Menu, Torchmate Setup, and select Tool Path Preferences. On this window, there is a check-box next to Group Tool Paths with Originals. Uncheck this option, re-apply the toolpath, and you should be able to delete the original with no problem.

[John999]

Thanks Mike
That sorted it
John