Your current software provider wants you to think they are giving you good common line cutting capabilities.
They are not. And, they can't. We have the best technology and we will PROVE our capabilities to you along side your current method of producing parts.
Bring your sigmanest, MTC, JetCam, Radan, etc., it doesn't matter. Invite your software provider to be a part of the competition. Surely, they would want to participate if they feel adequate enough.
We want to go head to head with what ever you use now. We WILL show you the ECONOMIC REALITIES. There is simply no other NC Programming and Nesting software on the market that will afford you all of the capabilities and efficiencies that you will realize with utilizing Optimation® products. None.
Scott
Contact me directly at: [email protected]
www.optinest.com/cd
www.optinest.com
Results 1 to 2 of 2
-
08-27-2008, 07:49 AM #1
Registered
- Join Date
- Aug 2008
- Posts
- 51
Common Line Cutting - We are the best. And, you don't have it.
-
09-05-2008, 08:13 AM #2
Registered
- Join Date
- Aug 2008
- Posts
- 51
Punching parts?
You should be looking at Optimation.
Scott
Contact me directly at: [email protected]
www.optinest.com/cd
www.optinest.com
Reply With QuoteSimilar Threads
-
Dm2400 Line By Line Execution????
By andrewtub in forum Benchtop MachinesReplies: 6Last Post: 01-26-2010, 05:28 AM -
Line Smoothing, point /line no identification
By dz1 in forum Visual BasicReplies: 8Last Post: 12-15-2007, 12:03 PM -
Common Variables
By viorel26 in forum G-Code ProgramingReplies: 3Last Post: 10-02-2007, 10:09 PM -
common line cutting
By gman in forum Waterjet General TopicsReplies: 3Last Post: 03-25-2007, 02:58 PM -
Cutting outside the line!
By GaryM in forum Machines running Mach SoftwareReplies: 7Last Post: 04-21-2006, 03:18 AM
Posting Permissions
