[glovebox20]

Hello

Just wondering if anyone has a Gibbscam post for a VF-3 with Through Spindle Coolant and a 2-speed gearbox they would like to share.

Thanks

glovebox20

[txcncman]

Here are all of the Haas posts I have. I do not know if any of them will work for you or not. It is difficult to tell which is which by looking at the names. Open the text file for each one and read the description.

[glovebox20]

Thanks for the post. Now I can start hunting. I cant belive how many different ways they are to write a Standard VF post. Most the post I've tried haven't work for me (Gibbs2007). It only truns cutter comp on the the first rough pass and won't shut it off untill the last rough pass of the contour. Grr!!!!! Also, if I'm using the pattern mothed it won't retract up to the clearance plane when it gose to the next pattern.

[sld4121]

Customers tend to be a bit picky on the order they want their code posted.
I would say about 90% of the post mods I do are cosmetic only.
Hence the reason you have so many posts available for the same control.

[glovebox20]

Customers tend to be a bit picky on the order they want their code posted.
I would say about 90% of the post mods I do are cosmetic only.
Hence the reason you have so many posts available for the same control.

Eathier I don't know how to use cutter comp right, or I'm just to fussy.