[tpmx57]

Has anyone ever attempted cutting gasket material on a vinyl cutter?
I would like to try scanning a gasket then be able to cut a new one.
I an not sure even which cutter may do it.

[Kidder Design]

you can cut, or rather score the rubber gasket material, but the cork is not going to work.

You will go through the blades quickly though!

[bisjoe]

That is a laser application.

[Bdanyeur]

I've sucessfully cut a gasket for my lawnmower using a Cricut. It wasn't cork but that paper like material not cork. It probably would cut cork if you made several shallower cuts as long as material fits between blade and mat.
I took a picture with a ruler to insure I had 1:1 measurement. I used adobe products to create cut path with magic wand tool which made it a piece of cake to layout edges of port and flange.
First time it took a while (could have cut by hand faster) but now, let machine do the work. As cheap as Cricuts are getting, I think you'll se more of this type of thing.

[CUTCNC]

our ascillating knife can be used to rubber gastket.