I have roughly 1000lbs of carbide sludge. Its really just carbide grit and oil mixed together. Its been sitting afew years and now all the carbide has settled to the bottom of the 5gallon buckets they are in. Problem is to recycle them it needs to be dry. So the oil needs to be 90% gone. Now ive tried just pouring it off the top. But more just shows up in afew hours. So I need a way to seperate the oil from the carbide.

I am thinking about dumping the carbide out onto a small grid and putting a filter on the grid to hold the carbide up but let the oil drip threw. But this may take alot of time. I need to get this stuff ready in the next couple weeks.

So if you guys have any good ideas of how to do this please let me know.