586,103 active members*
3,771 visitors online*
Register for free
Login

Thread: problem with offset adjustments

Results 1 to 2 of 2
  1. 09-11-2008, 09:02 PM #1
    uperez
    uperez is offline Registered
    Join Date
    Jun 2007
    Posts
    87

    Exclamation problem with offset adjustments

    Hi guys,

    I'm currently running on a nexus 350ym and the machine is perfectly fine when you're using mazatrol program but when we use an eia/iso program, the machine doesn't read all the adjustments in the wear compensation. Anybody here who knows what might be the problem? The control is 640T. Thanks in advance.
    Reply With Quote Reply With Quote
  2. 09-13-2008, 10:35 AM #2
    sfilippo
    sfilippo is offline Registered
    Join Date
    Aug 2008
    Posts
    11
    basic question but, are you G-Coding 4 digits with each tool?

    For instance, Tool #1 = T0101

    Check for Tool digit errors as well. Sometimes, a tired programmer can slip in an alphebet "O" for a numeric "0" on a tool or part of code and it can be hard to spot.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Problem with drive speed offset compensation by PLC programme
    By toninlg in forum Servo Motors / Drives
    Replies: 4
    Last Post: 12-13-2007, 07:42 PM
  2. Offset problem
    By smittys800 in forum Haas Mills
    Replies: 13
    Last Post: 06-17-2007, 07:08 AM
  3. Tool Change Offset problem on 3T control
    By Andy Kveps in forum Fanuc
    Replies: 1
    Last Post: 02-25-2007, 05:36 AM
  4. tool offset cancel problem
    By zoeper in forum DNC Problems and Solutions
    Replies: 8
    Last Post: 04-25-2006, 04:46 PM
  5. Being driven insane by an offset problem!
    By Cold Fusion in forum Uncategorised CAM Discussion
    Replies: 15
    Last Post: 09-12-2004, 04:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules