Dear friends ,
i am having SUGA lathe with Mitsubishi Meldas L3. system is almost dead. so i am trying to retrofit it. these are the details of CPU.
Type-FCA310L
MC632 CPU, MC111#3,MC303#2, MC301#1 as mentioned in the NC unit.
MR-S12-100B-E01 - Dual axis servo driver.
i need the pinout details for CN1A connector. and CN2 for encoder.
so it will be helpfull if any one send the pinout details for the CN1A and CN2 connectors. i think this servo drive is analog servo .
Regards,
keyan