[M.G.Machinist]

We have a Bridgeort Interact 720 machining center that has a Fanuc 0-Mate controller on it. We have lost the parameters for it. We had all of the parameters backed up except for the 900's. From my understanding these are set by Fanuc. Does anyone have one of these machines? Would I be able to get the 900's parameters from it? Any help would be great.

Thanks,
Matt

[fanuservicetech]

Although 900 series parameters are Fanuc option parameters, they are machine specific. You need to contact machine builder to get a generic list. You can also find this list on Fanuc data sheet usually located in the electical cabinet.

[M.G.Machinist]

Thanks, fanuservicetech. I have tried the machine builder and Fanuc. Bridgeport (machine builder) went under and Hardinge took what was left of the mills but they did not get all the paper work from Bridgeport. We bought this machine at an auction and there was no data sheets or anything with it. The guy from Hardinge is going to email a person in England to see if he can get it but doesn't look real hopeful.

Matt