[zcases]

I have a very crude dxf so far, and am hoping for a rough order of magnitude on this. The dxf will be refined when the company completes their logo, and time wise should not be too far off from this. I need to give a ROM to my customer though, before the logo design is completed.......A litle bit of the chicken-egg syndrome.

The final design will be much beter artwork, and the leters will be tabbed so the O's and A's, etc. stay intact.

I'd like to quote .040SS (303, 304, etc.) and 1/16 6061. Quantity will be 20 - 30 for one initial order, then will flow at about 25 per year. Hopefully I can get a rough idea on this in a few days, and go from there.

thanks
Scott

[Cebby]

All those nodes on the curves will wreak havoc on a waterjet. Laser, not as much...

[zcases]

I can clean up the vectors when I get a finalized logo from the customer. Is anyone interested in quoting?

Scott

By the way, my zip is 13862 for shipping.

thanks again

[BulleTxMagneT]

have you had this taken care of already? if you still need a quote on this let me know. thanks

[zcases]

I am still open to receiving quotes. I have received some and thanks to those who have replied so far. I will be contacting my customer today and then it may be a week + before they decide the next step.

Scott