Hello,
I'm using EIA/ISO/ format on M2 controller. I want to offset (G41) my cutter, when I go to the tool offset page and put -.005 it just goes that much deeper with z axis. I see that one cannot put a negative value in the tool data page. Does anyone know how to offset on the x and y plane? Thanks in advance.
Thread: Using cutter comp eia/iso on M2
Results 1 to 12 of 12
Threaded View
-
09-24-2008, 04:06 PM #1
Registered
- Join Date
- Dec 2006
- Posts
- 35
Using cutter comp eia/iso on M2
Reply With QuoteSimilar Threads
-
Cutter Comp?
By starvinmarvin in forum MadCAMReplies: 16Last Post: 09-28-2013, 11:05 PM -
M2 cutter comp help
By nlh in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 06-02-2009, 05:59 PM -
Cutter Comp.
By Bob Z1 in forum Uncategorised CAM DiscussionReplies: 2Last Post: 05-28-2009, 04:21 PM -
Cutter comp on an id hole< cutter diam.??
By PaintItBlue in forum Haas MillsReplies: 5Last Post: 05-06-2008, 12:30 AM -
Cutter Comp?
By donl517 in forum FadalReplies: 5Last Post: 07-03-2007, 02:36 PM
Tags for this Thread
Posting Permissions
