Who can tell me:
What is the relationship between arc voltage and cutting height on the THC?
Thank you
Dennis
Thread: plasma THC voltage
Results 1 to 20 of 20
Threaded View
-
10-01-2008, 04:02 AM #1
Registered
- Join Date
- Mar 2005
- Posts
- 63
plasma THC voltage
Reply With QuoteSimilar Threads
-
High voltage power supply, low voltage perihperals
By feechl in forum CNC Machine Related ElectronicsReplies: 2Last Post: 01-07-2014, 02:12 AM -
Precix 9100 Controller - VI voltage issue Voltage range only 6.5 to 10Volts
By wdysf150 in forum Controller & Computer SolutionsReplies: 0Last Post: 08-15-2013, 08:24 PM -
Plasma Cutter with Broken wires and High DC output voltage
By DavidJB in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 0Last Post: 05-11-2012, 05:00 AM -
THC with High Voltage Start Signal Plasma Source
By archcomp in forum Mach Plasma / LaserReplies: 0Last Post: 12-09-2011, 03:09 PM -
Need analog circuit nerd to help with DIY DTHC plasma reference voltage
By jlindst in forum Plasma, EDM / Other similar machine Project LogReplies: 3Last Post: 04-02-2011, 04:22 PM
Posting Permissions
