How do you create a new type of milling stock in V22? I want to create one for wood and all the defaults are metal.
Thanks.
How do you create a new type of milling stock in V22? I want to create one for wood and all the defaults are metal.
Thanks.
One may exist but I haven't seen an option to add new cutting conditions.
What you could do is modify one of the existing cutting conditions.
To do this goto Milling Tools, select Default, select Cutting Conditions.
Modify one of the existing cutting condition options then select "save to file"
Warren
Why not just change your feeds and speeds manually??
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Granted that is the way to go in other software packages, but personally I never use the slow feeds and speeds a software calculates. Usually I run about 250% faster and harder.
Wood is a different story because of the fire risk.
Give the material creation idea a shot, experiment with it, and post your results good or bad.
It is worth a shot to see what happens.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com