I have recently acquired a Gildemeister N.E.F 660 lathe , which I intend to retrofit.
It has Heidenhain ROC 320 encoders, can anyone tell me the channel color code for this encoder.
Dave
Thread: Heidenhain encoder help
Results 1 to 3 of 3
-
10-06-2008, 10:17 PM #1
Registered
- Join Date
- Jun 2006
- Posts
- 43
Heidenhain encoder help
-
10-06-2008, 10:30 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
I don't have the ROC320 specifically listed, but the majority of the ROC types I show as absolute single turn encoders, either 11 to 14 bits wide or absolute synchronous-serial.
If you want to be sure, I have got good feedback from Heidenhain Canada before by email.
You could try confirming it with them.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
10-06-2008, 10:45 PM #3
Registered
- Join Date
- Jun 2006
- Posts
- 43
Al,
Thanks for info.
Dave
Reply With Quote
Similar Threads
-
Heidenhain encoder
By N4NV in forum Servo DrivesReplies: 2Last Post: 06-17-2009, 02:36 PM -
Wet Heidenhain 151
By bigtoad170 in forum Bridgeport / Hardinge MillsReplies: 4Last Post: 06-09-2008, 10:32 AM -
Heidenhain encoder
By N4NV in forum Gecko DrivesReplies: 7Last Post: 02-10-2007, 05:24 PM -
Heidenhain
By kura in forum DNC Problems and SolutionsReplies: 0Last Post: 06-28-2006, 12:24 PM -
How to tell if my motor is Pulse encoder or quadrature encoder?
By Darc in forum Servo Motors / DrivesReplies: 0Last Post: 07-22-2005, 09:51 AM
Posting Permissions
