hello,
anyone know what is a TPI no. for Sherline rotary table?
or
what is a .INI No. for Turbocnc(Sherline rotary table)?
1)Step per rev:_
2)Pitch of screw:_
3)Microstepping:_
4)Reduction:_
thanks
:drowning:
hello,
anyone know what is a TPI no. for Sherline rotary table?
or
what is a .INI No. for Turbocnc(Sherline rotary table)?
1)Step per rev:_
2)Pitch of screw:_
3)Microstepping:_
4)Reduction:_
thanks
:drowning:
here's a small piece for your puzzle:
1 revolution of input shaft = 5 degrees on the table