hi,
I have Om kontrol
I send standart part program but Tool change macro program not accept machine
Give me alarm 087 buffer overflow,
I try the wrıte Macro program Not open O9000
and On Mdı panel not have "[" "]" "#" like these
but in offset setting there MACRO have
I see macro variable
Please Help
Results 1 to 4 of 4
-
10-09-2008, 10:20 AM #1
Registered
- Join Date
- Jul 2005
- Posts
- 54
cant send Om control tool change macro
-
10-09-2008, 10:47 AM #2
Registered
- Join Date
- Feb 2007
- Posts
- 314
you have to set parameter #10 bit 4 (5th from the right) to 0 (xxx0xxxx).
You need to be in MDI mode and PWE must be set to 1
-
10-09-2008, 05:26 PM #3
Registered
- Join Date
- Jul 2005
- Posts
- 54
thank
I am not try Mdı Mode and write enable position I will try thanks
-
10-09-2008, 07:18 PM #4
Registered
- Join Date
- Feb 2007
- Posts
- 314
It is to change parameter value that you have to be in MDI and PWE=1, not to output your program.
Originally Posted by Osmanselim
Reply With QuoteSimilar Threads
-
A sample tool change macro.
By gar in forum Haas MillsReplies: 24Last Post: 10-19-2012, 08:33 PM -
TOOL CHANGE MACRO NEEDED?
By offroadxx in forum FanucReplies: 7Last Post: 10-14-2012, 05:16 AM -
Help for tool change macro on OM VMC
By Namnp2007 in forum FanucReplies: 3Last Post: 08-12-2008, 05:18 PM -
O9000 Tool Change Macro
By omkargupta in forum FanucReplies: 1Last Post: 09-10-2007, 10:41 PM -
Tool Change Macro
By cncdiag in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 03-26-2007, 08:20 PM
Posting Permissions
