i been lurking mostly in the Mill forum, but have a chance to buy a clarke metalworker similar to http://store.summitracing.com/largei...k-bt1028_w.jpg for $175.00
I have never used a lathe and don't have anything in mind for it, but we always "need" another tool. anyone think thats a decent deal, or should I just spend the money on more tooling on my mill?
thx
Thread: Deal or no deal Lathe
Results 1 to 3 of 3
-
10-15-2008, 08:16 PM #1
Member
- Join Date
- Jul 2007
- Posts
- 36
Deal or no deal Lathe
-
10-16-2008, 12:03 AM #2
Registered
- Join Date
- Jul 2006
- Posts
- 58
Read up over here. http://www.mini-lathe.com/Default.htm
The Clarke is listed in the VERSIONS section. If it has all the accessories and parts, I'd say it could be a handy tool.
http://search.harborfreight.com/cpis...athe&Submit=Go
-
10-16-2008, 05:53 PM #3
Member
- Join Date
- Jul 2007
- Posts
- 36
thx!
Reply With QuoteSimilar Threads
-
Good deal on a Lathe
By Chris64 in forum Uncategorised MetalWorking MachinesReplies: 14Last Post: 08-26-2007, 12:57 AM -
What do you think of this deal??
By zoeper in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 07-03-2006, 02:17 AM -
12"X30" Lathe on Ebay, $1000 - good deal?
By mxtras in forum MetalWork DiscussionReplies: 2Last Post: 06-24-2005, 04:12 PM -
A Done Deal
By CRFultz in forum DIY CNC Router Table MachinesReplies: 20Last Post: 05-21-2005, 12:26 AM -
Not a bad deal....
By anoel in forum DIY CNC Router Table MachinesReplies: 1Last Post: 10-21-2003, 04:51 PM
Posting Permissions
