Here is a showing turning one of a set of parts on my conversion cnc lathe?
YouTube - CNC-BearingStandoff2ndOp
Alan
Here is a showing turning one of a set of parts on my conversion cnc lathe?
YouTube - CNC-BearingStandoff2ndOp
Alan
Strange. I could embed my youtube video in other section of this forum. Can't seem to embed you video at all in this one. But no worries, I can see the video. Nice. Looking to cnc my lathe as well.
you copy the url from the top of the page - not the 'embedded' link.
This one '''http://www.youtube.com/watch?v=PIg2ON_bbhY'''
[ame="http://www.youtube.com/watch?v=PIg2ON_bbhY"]YouTube - CNC-BearingStandoff2ndOp[/ame]
That's exactly what I did but all I get is a link line. Strange.
Sam,
Thanks that worked. I edited my first post to do it correctly.
Alan
Alex,
I was having the same problem. I went to my youtube account clicked on my video and found the same address that Sam was using. Then I copied it from the address bar of my browser and pasted it directly into the post as if it was text. You also have to have go to options under "Advanced" and have "automatically embed videos" checked.
Hope this helps,
Alan
Ok, Thanks. I did this before correctly with my other post. Maybe the last time I did it, it was a fluke. Glad you managed to solve it.
Alex