I’m not sure if this is allowed or not if not remove it.
I have all of the original control system in working condition for sale off of a Boss5 series 1.
Still in both back and side cabinets. I think I only cut one wire when removing them all the other wires were removed at the bottom of the rear cabinet and are marked.
Includes all transformers, capacitors, cards and the interface as well as the tape drive.
I also have a couple of manuals as well.
Has been stored inside and is in working condition.
I also have about 70 driver transistors for sale as well, new.
I am in Alberta Canada,
Stephen