For some reason i cannot get plines or lines to join, i have tried using Join command and pedit command, i ahve tried closing plines and lines still nothing aslo, what i wan to draw is 2, 3 inch circles 3 inches a part and then make a saggind line from one circle on one side to the other circle same side the look will be likea choppers belt cover or 2 tear droops back to back with the points touching?
Thread: join lines, Autocad 2008
Results 1 to 2 of 2
-
10-27-2008, 07:22 PM #1
Registered
- Join Date
- Aug 2008
- Posts
- 6
join lines, Autocad 2008
-
10-27-2008, 11:00 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Post the drawing and I'll tell you why.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
MODIFY JOIN LINES
By CNC_BOB in forum MastercamReplies: 11Last Post: 10-01-2008, 06:53 PM -
How do I join these together?
By Apples in forum Mechanical Calculations/Engineering DesignReplies: 9Last Post: 03-17-2008, 05:02 AM -
What's the most rigid way to join 80/20?
By digits in forum 80/20 TSLOTS / Other Aluminum Framing SystemsReplies: 16Last Post: 10-26-2007, 11:16 PM -
forgoten how to erase lines in AutoCAD
By Apples in forum AutodeskReplies: 5Last Post: 05-04-2004, 03:06 PM
Posting Permissions
