I'm looking to find a 'generic' parameter list for the 0M-A and/or 0M-B which has just the basics as for their settings. Does it matter if its the GN or the GE FANUC Model, or are they about the same? Mine is the GE FANUC Model.
I also need to know how to set the machine worktable limits.
I've tried for about 3 years (since mid '05) to get the right manuals with the right parameter lists.
I would appreciate if someone could supply me with a complete set of general / basic parameter lists.
The machine is a custom built 3 (w/Installed optional 4th) axis milling machine that I had built with the option to install whatever control and servos I wanted. 4th Axis is a option I had the builder make for me, and at one time thought about 5th. It looks and operates much like most VMC/HMC's.
I hope someone can help me with some or a little direction here.
Thanks, many many thanks in advance.
Greg