Hi,
I have a 1996 Feeler FV-800 VMC with Mitsubishi Meldas 520 AMR control.
It has a RS 232 port and I intend to connect it to any of my PC's via a Ethernet switch and the Ethernet-RS232 adapter that I already have in the CNC's cabinet. Which is the best way to go, Software handshake or Hardware handshake. Would appreciate cable pinouts and parameter settings. I intend to use a CAM program, maybe VM 6 Pro, and I assume that it has a DNC program bundled. By the way, which one is it ?