[tenmetalman]

To ALL,
I currently have three remaining HP UHU kits with PCB's. Is there any interest in additional PCB's with or with out parts kitted ? I also have additional parts Kits WITHOUT PCB's if anyones interested ?
I'm guessing I would need to order in the neighborhood of 50 PCB'S to hold the current prices. Irfanulla & I have been selling kits that include most everything except Uli's UHU chip & crystal, also not included, the heatsink, & small misc things for $150/00 ea or three kits for $425.00 or the bare PCB'S at one for $25 or three for $65. We do NOT sell completed drives. If you are interested in purchasing additional PCB's or Kits let me know here. If there's sufficient committed interest I'll check with the PCB manufacturer for current prices............................
Tenmetalman

[vaughanatworld]

To ALL,
I currently have three remaining HP UHU kits with PCB's. Is there any interest in additional PCB's with or with out parts kitted ? I also have additional parts Kits WITHOUT PCB's if anyones interested ?
I'm guessing I would need to order in the neighborhood of 50 PCB'S to hold the current prices. Irfanulla & I have been selling kits that include most everything except Uli's UHU chip & crystal, also not included, the heatsink, & small misc things for $150/00 ea or three kits for $425.00 or the bare PCB'S at one for $25 or three for $65. We do NOT sell completed drives. If you are interested in purchasing additional PCB's or Kits let me know here. If there's sufficient committed interest I'll check with the PCB manufacturer for current prices............................
Tenmetalman

I am interested in one of your UHU kits with PCB. How may I pay you?

[tenmetalman]

vaughanatworld,
If you would e-mail me at "[email protected]" and include your complete mailing address I'll send you a total that includes shipping......
Thanks for your interest
Paul

[contactirfu]

Price went up for the Mosfets by 25C each FYI. This should not impact the kit pricing though - I still have to chk on the pricing for other parts. People interested do keep emailing us, so that we have enough to meet the demand.

RGDS
Irfan

[tenmetalman]

Hey All,
I've got 30 + PCB's ordered that will be available DEC. 7. I was able to hold my price this time so our price will be the same. Kit's & bare boards available.
compoment prices are on the rise..............................
1 piece Bare PCB = $25.00us plus shipping
2 pieces Bare PCB = $50.00us plus shipping
3 pieces Bare PCB = $65.00us plus shipping

1 Kit (1 PCB Plus electronic components) = $150.00us plus shipping
2 Kits (2 PCB's plus electronic components) = $300.00us plus shipping
3 Kits (3 PCB,s plus electronic components) = $425.00us plus shipping

to you that have asked. I have a few "used" programed chips available that I would sell for $10.00 each including a new crystal. they all work fine . I believe their programed series 3.03 or there abouts........
ULI is still your best choice for programed chips !!!
Paul

[jcdammeyer]

Hi Paul,

I tried to contact you through the [email protected] address but no answer so something didn't work right.

I still can't source the inductors from Newark so if possible I'd like to order 5 from you.

Thanks
John Dammeyer
[email protected]

[tenmetalman]

I was able to order additional PCB's at the existing price and will have parts to assemble kits by the end of the month.
Thanks for the continued interest.
Paul

[tenmetalman]

Hello All,
I currently have 24 available PCB's and most of the components required for kits. I hope to have the rest of the required parts by Sep. or sooner. I'll keep you'all posted.
one more time the prices are holding. shipping is going up though, so I've reverted to USPS Priority if at all possible.
Paul

[tenmetalman]

Hello All,
After all the problems getting all the parts required for the current kits we were able to get some of the parts discounted to us. We're passing that savings on the the first five customers who purchase three kits each during the remaining days in the month of September . the special price to them will be $400.00us plus shipping & handing........................
Get your order started now...............
Thanks for your continued interest
Paul

[contactirfu]

Hello All,
After all the problems getting all the parts required for the current kits we were able to get some of the parts discounted to us. We're passing that savings on the the first five customers who purchase three kits each during the remaining days in the month of September . the special price to them will be $400.00us plus shipping & handing........................
Get your order started now...............
Thanks for your continued interest
Paul

OK for this you need to email [email protected]

[kirkchabot]

how do we get a hold of u?
E-mail?

[tenmetalman]

Good Morning !
Yes. e-mailing to "[email protected]" will start the thread. It you give me your address in your first e-mail I'll answer any questions the best I can. I'll give you a total cost & my PayPal account address for payment.
Thanks for your interest
Paul

[vaughanatworld]

Sirs,

I purchased one of these kits in late November 2008. Then I got distracted by other duties. Now I am back.

Can someone direct me to the schematics/parts list/layout of Paul's HP UHU controller. Then I will be able to complete the assembly and testing of the board.

Thanks in advance.

Brian

[contactirfu]

yes

[tenmetalman]

Just an update to be sure it's known the the PCB'S & Kit's are still available. my participation on the list & working on my project has been about non existence due to on going health problems.
I'm holding the prices at their original cost until suppliers drive them up !
shipping has got to the point that I'm only using USPS unless specifically requested to use one of the other shipper's

1 piece Bare PCB = $25.00us plus shipping
2 pieces Bare PCB = $50.00us plus shipping
3 pieces Bare PCB = $65.00us plus shipping

1 Kit (1 PCB Plus electronic components) = $150.00us plus shipping
2 Kits (2 PCB's plus electronic components) = $300.00us plus shipping
3 Kits (3 PCB,s plus electronic components) = $425.00us plus shipping

Thanks for the continued support.
Paul H

[H.O]

Hi Paul,
Nice to hear from you, it hurts me to hear about your healt issues, I hope you'll recover!

For anyone concidering the HP-UHU (or any UHU based drive for that matter) I've got my servo-module as an alternative to the original chip. More information, datasheet and manual are available on my website.

Price is €30/pcs

/Henrik.

[tenmetalman]

Hello All,
A quick note to remind everyone that I'm using Henrik's modules on my project. it's a Bridgeport Discovery 300 vertical CNC mill that "lost it's mind" and has languished forever and a day due to other events interfering. Henrik's Modules are made to an outstanding level of quality and the only way to go if your using high count encoders (anything above 500 LRP). or are having repeated events involving un-explained lost of position. Henrik now has a site "http://www.henriksplace.se" with the basic information supporting his modules. Uli's original chip ("http://www.uhu-servo.de/") has & still works well below 500 LPR. you will find him responsive.
Paul (tenmetalman)

[tenmetalman]

this is just a quick update to let everyone know that I still have PCB's & kits available at the old prices:
1 piece Bare PCB = $25.00us plus shipping
2 pieces Bare PCB = $50.00us plus shipping
3 pieces Bare PCB = $65.00us plus shipping

1 Kit (1 PCB Plus electronic components) = $150.00us plus shipping
2 Kits (2 PCB's plus electronic components) = $300.00us plus shipping
3 Kits (3 PCB,s plus electronic components) = $425.00us plus shipping

to say I've not been active is an understatement ! If anyone is interested in contacting me please use my e-mail address:
[email protected]

I've recently changed to windows 8 and am stumbling around...... if you've e-mailed me & I've not replied, please accept my apology and e-mail me again at the above addr & I will respond
Thanks
Paul