Looking for proper post for my Dynamyte 3300 lathe that has the Meldas L3 control. Point me in the right direction please.
Looking for proper post for my Dynamyte 3300 lathe that has the Meldas L3 control. Point me in the right direction please.
Exotic Welder
Hi Dave6,
Wanted to make sure this was handled for you...
Dolphin CAD/CAM Support
Help is ongoing with mixed results. I purchased the level 1 support deal. Part of the problem seams to be a lack of good solid info on how a post should look for my L3 control. Canned cycles are the problem. The expanded post works but the programs get large. We have facing, turning and profiling working now and are working on drilling with no luck yet. I have yet to try tapping and the rest if the canned cycles. Thanks for asking.
Exotic Welder