[drosscr]

Hello!

We have an Anton System - Engelhardt CNC Metal Milling machine, but we don't have any manuals and we need to get complete user manuals and information on the controls and the milling machine itself. We have had a tough time getting good information on it.

We would be grateful for anything you can help us with.

I have attached several pictures as reference.


Following is the information we DO have:

1) Markings:
Anton System CNC-Ausbildung

2) Original Manufacturer:
Dipl. - Ing. ENGELHARDT GmbH
Heinrich -Hertz-Str. 9
76646 Bruchsal
Germany

Does anyone know if they are still in business? Or if they merged or changed names?

3) Steppers:
Storga - SM 86.2.18.JJDNS3 Series: 8701 AMP/PH 3.5 (http://stoegra.de/pdf/sm86_2_e.pdf)

4) Spindle:
Electro Magnetic 15AMP - 220V DC Motor

5) Circuit boards: just mention "Engelhardt"

6) Tool Exchanger: no markings.

7) CNC Software: When the CNC software boots-up it gives us the following information:
CNC 3300
Engelhardt
2200 V7.02 02/90
Fehlertasttur 7F79

8) We did find a manual for a similar configuration - but appears to be a later version:
http://www.automatech.xnet.ro/Pdf/man_d22f33_en.pdf

As I mentioned, we are looking for manuals, specification documents on the milling machine itself and the controls.

Thank you in advance for any help with this.

Daniel

[drosscr]

Has anyone seen anything remotely similar to this one? I would be grateful for any leads.


Thanks!

Daniel