Hi,All I have a victor v center-4 with a fanuc 10m controller and I notice when I go to the position screen at the bottom of the screen it has such things as feed rate speed rate and rpm.Every thing has something beside it but the rpm is this something that the manufacture of the machine does not use or is it a parameter setting that I do not have set?
Thank You
Results 1 to 2 of 2
-
11-16-2008, 04:30 AM #1
Registered
- Join Date
- Oct 2008
- Posts
- 103
rpm display on fanuc 10m controller
-
11-17-2008, 06:20 PM #2
Gold Member
- Join Date
- Jun 2008
- Posts
- 1511
This is probably a parameter setting. I do not have the parameter list for the 10M control. Look in your parameter book for parameters related to "CRT/MDI, Display, and Editing". It should be listed in there. The bit label on my controls is (NOS).
Stevo
Reply With QuoteSimilar Threads
-
Fanuc O-MD prog ck display
By yoshi900 in forum FanucReplies: 3Last Post: 10-15-2008, 11:35 AM -
Japanese display on Fanuc 12M
By duccnc in forum FanucReplies: 2Last Post: 07-16-2008, 02:49 PM -
Fanuc 0i-TC Display Parameter
By Hoonie in forum FanucReplies: 5Last Post: 05-20-2008, 07:44 PM -
Position Display on fanuc 6m
By fredf1 in forum FanucReplies: 1Last Post: 10-22-2005, 10:08 AM
Posting Permissions
