hello every one i just started in a new job and they have a viper 500 with a mitsubishi control but no manual and only have experience with fanuc controls, so i will be greatful if some one has some informacion about it i just need basic info enough to get me started and may be if there is some especial g code with that is critical in this machine. thank you guys very much and have a great turkey day,dont drink and drive .
Results 1 to 2 of 2
-
11-26-2008, 08:42 PM #1
Registered
- Join Date
- Sep 2008
- Posts
- 22
new for: viper v-500/mitsubishi VLC
-
11-26-2008, 08:48 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
You will find for the most part it is close to Fanuc.
You can download the manuals from the MEAU.com site.
http://www.meau.com/eprise/main/site...e=&ManualType=
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
40 Amp 250 volt Viper coming soon
By Larken in forum Viper Servo drivesReplies: 29Last Post: 06-18-2012, 05:50 PM -
Viper manual download fix
By Larken in forum Viper Servo drivesReplies: 7Last Post: 11-15-2009, 01:57 AM -
viper & boxford
By bbrreid in forum Viper Servo drivesReplies: 9Last Post: 02-16-2008, 10:19 PM -
Viper lathes
By Rune in forum Uncategorised MetalWorking MachinesReplies: 4Last Post: 08-27-2007, 08:45 PM -
Viper servo drive overview
By Larken in forum Viper Servo drivesReplies: 39Last Post: 06-30-2007, 07:36 PM
Posting Permissions
