If You want to modernise/retrofit Your CNC (or non CNC) plasma/oxygen cutter, we can do it!
We did a few plasma cutter retrofittings, mostly Messer Griesheim. The earliest one was about 3-4 years ago and it didn't have any failure.
We install the CNC, servo drives & motors, write the PLC.
For our CNC we'll give You a 3 year guarantee. The CNC is not PC-based.
You can upload the ISO code through a USB or Your LAN network.
Over the past 15 years, we have modernised/retrofitted over 100 types of CNC machines.
We are situated in:
Zagreb, Croatia
You can find us at:
[email protected]
Regards,
WokiToki