Good afternoon all I have a Mori SL-3 that had been without power for quite a while. When I power up machine doesn't sound right. I checked the incoming power and it checks good. But on the other side of the switch on the cabinet door the Blue leg has 123v going in and 78v coming out. I've never seen one of these switches go bad but it sure looks like this one bit the dust. A little more background I have 240v 3 Phase power so two 120v legs and one high leg at 220v across any two you get 245v across the blue leg and any other leg you get 190v I don't want to burn up anything. If I do try to home out machine I get 231 Ref point return area error x 232 Ref point return area error z. Any help would be greatly appreciated.
PPM Inc
Tim Wyatt