Guys,
can i use a post from an older version of esprit and use it in a newer version.
i.e. going from X to 2007. the posts are for both mill and lathe work. do i need to update the posts or do i jess plug em in and run.
Thread: post update
Results 1 to 3 of 3
-
12-03-2008, 09:42 PM #1
Registered
- Join Date
- Nov 2003
- Posts
- 17
post update
-
12-04-2008, 07:42 AM #2
Gold Member
- Join Date
- Mar 2003
- Posts
- 2932
There's been a lot of changes to the post between X and 2007. I'd be surprised if you get the same results from both, but it's worth a try. What machine/control?
-
12-04-2008, 03:50 PM #3
Registered
- Join Date
- Nov 2003
- Posts
- 17
Okuma osp 5000 & 7000 controllers. how do i go about migrating the posts
Reply With QuoteSimilar Threads
-
update
By MSPP in forum BobCad-CamReplies: 9Last Post: 05-17-2008, 06:00 PM -
10.7 Update
By Dolphin USA in forum Dolphin CAD/CAMReplies: 0Last Post: 03-17-2008, 09:12 PM
Posting Permissions
