586,075 active members*
3,937 visitors online*
Register for free
Login

Thread: Fanuc Series O-T Trouble

Results 1 to 2 of 2
  1. 12-10-2008, 07:06 PM #1
    NOVADAVE
    NOVADAVE is offline Registered
    Join Date
    Aug 2006
    Posts
    2

    Fanuc Series O-T Trouble

    I have an old Daewoo CNC lathe. Today it would not start up. It gives Alarm06. I don't know what it is and am not able to continue starting the control up. Help how to clear this and what could cause this alarm.
    Reply With Quote Reply With Quote
  2. 12-10-2008, 08:01 PM #2
    NOVADAVE
    NOVADAVE is offline Registered
    Join Date
    Aug 2006
    Posts
    2
    When I power up the mach the chuck light comes on then the Hyd pump should start next but there is a click and nothing else.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Fanuc Series 15-M Trouble uploading Ladder Program
    By grege101 in forum Fanuc
    Replies: 5
    Last Post: 12-14-2007, 04:38 AM
  2. fanuc 6t trouble
    By ezjn in forum CNC Machining Centers
    Replies: 1
    Last Post: 11-15-2007, 03:52 AM
  3. Trouble with a series 1 boss 8 v2e3
    By fireman323 in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 08-28-2007, 12:53 AM
  4. Series I CNC trouble in Holland....
    By Wallie in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 08-10-2007, 04:10 AM
  5. fanuc 10m trouble
    By ezjn in forum CNC Machining Centers
    Replies: 4
    Last Post: 09-04-2006, 06:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules