547,349 active members*
2,614 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > Acramatic 2100 control Help
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Dec 2008
    Posts
    1

    Acramatic 2100 control Help

    I have a machine in the over travel position in Z
    I understand I need to hold the control button in to keep the Hydraulics on but it show a button to push in the manual to press to remove power feed inhibit
    I can't figure out what button I am to push so I can us the hand wheel and move the machine off the over travel

    If anyone could help me with this it would be a big help

    Thanks

  2. #2
    Registered
    Join Date
    May 2007
    Posts
    64
    I assume you are talking about a VMC, not sure what you mean by hydraulics. Hold the master start button then jog the axis down, also if the machine is a VMC and the tool carosel is not fully retracted it will inhibit the z axis from moving down.

    Rick

  3. #3
    Registered
    Join Date
    Jun 2007
    Posts
    43
    Is it not the data set button?

  4. #4
    Registered
    Join Date
    Aug 2008
    Posts
    97
    NO IT IS NOT THE DATA SET BUTTON IT IS THE MACHINE POWER ENABLE GREEN BUTTON THE ONE THAT YOU TURN YOUR CONTROL ON WITH WHEN YOU POWER IT UP. THEN USE THE -Z AXIS JOG BUTTON NOT THE HANDWHEEL.

Similar Threads

  1. Acramatic 2100 help!!
    By SBAGHAEI in forum Cincinnati CNC
    Replies: 16
    Last Post: 07-14-2016, 08:28 PM
  2. siemens acramatic 2100 control
    By jptalon in forum SIEMENS Sinumerik CNC controls
    Replies: 2
    Last Post: 09-19-2012, 12:00 PM
  3. acramatic 2100 control
    By greg b in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 11
    Last Post: 06-01-2009, 09:33 PM
  4. Acramatic 2100
    By mblazenby in forum Tree
    Replies: 4
    Last Post: 02-05-2009, 02:30 PM
  5. Acramatic 2100 control parts
    By VSMIGuy in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 02-19-2007, 08:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •