Here is the file from the machine as we're running it now. I have a couple of small things to fine tune in the settings, but it's making chips right now - so I'll get to it later.
Hope this helps.
John B
Here is the file from the machine as we're running it now. I have a couple of small things to fine tune in the settings, but it's making chips right now - so I'll get to it later.
Hope this helps.
John B
Very cool, I've been in this situation.
Hello John B I hope you could help me out directly or guide me in the right direction. I have a Okuma-Howa Millac 3VA with Fanuc system 10m. System Parameters have been lost due to dead battery. Could you help me get a backup for my machine? Please help.
Best regards, Greg.
Hello,
Urgently needed:
CNC and PC parameters for a Mori Seiki MV-Junior with FANUC Series 10M control.
Can anybody help with parameters??
can you help me plz
sent me email [email protected]