I have a Calcomp 1012 plotter (tractor feed) and was wondering is it worth saving to be used by someone who cuts vinyl letters. If not, I will scrap it for parts to be used in the making of a cnc router.
Thread: 1012 plotter
Results 1 to 4 of 4
-
02-13-2005, 03:27 AM #1
Registered
- Join Date
- Jan 2005
- Posts
- 746
1012 plotter
-
02-25-2005, 02:35 AM #2
Registered
- Join Date
- Jan 2005
- Posts
- 746
I take it from the lack of replies that there is no use for the plotter. I guess I will tear it down for parts. Going....Going............
-
02-25-2005, 06:02 AM #3
Gold Member
- Join Date
- Aug 2004
- Posts
- 48
So what are you going to make with it? :idea:
-
02-26-2005, 05:39 AM #4
Registered
- Join Date
- Jan 2005
- Posts
- 746
I'm going to take it apart and see if ther are any usable parts inside. My ultimate goal is to make a cnc router table. As old as it is I'm hoping there is a stepper motor large enough to be of some use.
Reply With QuoteSimilar Threads
-
HP 7475A Plotter Help
By VNSPEC22 in forum Printing, Scanners, Vinyl cutting and PlottersReplies: 26Last Post: 08-22-2010, 03:10 PM -
XP driver for HP plotter
By Fixxit in forum Printing, Scanners, Vinyl cutting and PlottersReplies: 11Last Post: 09-05-2007, 07:56 AM -
HP 7470A Plotter
By VNSPEC22 in forum Printing, Scanners, Vinyl cutting and PlottersReplies: 2Last Post: 08-16-2005, 03:38 PM -
Need help on Hitachi Seiki error 1012
By anti-SAMS in forum DNC Problems and SolutionsReplies: 1Last Post: 11-25-2004, 02:26 AM -
HP 7475 plotter
By Stevie in forum CNC Machine Related ElectronicsReplies: 0Last Post: 03-20-2004, 04:43 PM
Posting Permissions
