Happy new years to all!
I just bought a 1985 Mori SL3H with a Yasnac LX1 control.
My question is about setting parameter #6007? Every other parameter i can change, but the manual does not really tell me how to change D3 from 0=mm to 1=inch?
If anyone can help, i thank you.
The problem i am having is on the Z axis. I set my indicator up to check the travles, when i move Z 0.010 the indicator moves 0.014. X axis is fine, moving the indicator 0.005 when the machine reads 0.010.(Dia. programing)
I will keep reading the LX1 manual, if anyone knows why the machine moves more than it says its moving, please let me know. Or if that is the wrong parameter to deal with this problem. I need to start programing, but not intill the issue is resolved.