Having trouble with a "1114 main spindle orient fault" on a hardinge TT-65. It has a fanuc 18i-T controller. Any help would be much appreciated.
Having trouble with a "1114 main spindle orient fault" on a hardinge TT-65. It has a fanuc 18i-T controller. Any help would be much appreciated.
We have Mori Seiki mill with 18i and had problem with spindle orientation for tool change parameter 4077 worked for us. Try changing parameter 4077 or check out this
http://www.machinetoolhelp.com/Repai...ientation.html
don't change param 4077 it is for turret orientation on your tt-65.
Thanks for the input guys, ended up being a bad drive, main spindle drive to be exact. Thanks again for the input.