Your machine is probably set up backwards. The X should probably be in the other direction. Home Neg will have it home in the opposite direction, but it won't reverse the axis. You need to reverse the motors direction.
Your machine is probably set up backwards. The X should probably be in the other direction. Home Neg will have it home in the opposite direction, but it won't reverse the axis. You need to reverse the motors direction.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)