Hello everyone,
Wondering if there is any company or anyone out there who sells a ballscrew upgrade for the Taig CNC mill. Any help would be most appreciated.
Thanks,
Phil
Hello everyone,
Wondering if there is any company or anyone out there who sells a ballscrew upgrade for the Taig CNC mill. Any help would be most appreciated.
Thanks,
Phil
Not a direct bolt in but several folks have used ballscrews and nuts from mcmaster carr. Go to their page and in the find products section just type in ballscrew. JRouche
http://www.mcmaster.com/
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)