Thanks for your previous help, it was absolutely invaluable for this post and many to come.
My tweaked post for the ProtoTrak DPM works like a champ now with one exception and that is that a null tool change never seems to get called (the ptlchg0 section of the post never gets used). Where there should be a null tool change the the post uses the ptlchg section. Is this something that needs to be changed in the post or is it a MasterCam setting that I have overlooked?
Results 1 to 2 of 2
-
12-01-2004, 06:26 PM #1
Registered
- Join Date
- Oct 2004
- Posts
- 9
One more little bump in the ProtoTrak post
-
01-05-2005, 05:10 AM #2
Registered
- Join Date
- Mar 2004
- Posts
- 21
In some posts the ptlchg0 calls ptlchg
Example
ptlchg0
ptlchg
Copy and paste your ptlchg0 into a message.
Reply With QuoteSimilar Threads
-
Emco Compact 5 PC...have ????
By Double G in forum Mini LatheReplies: 42Last Post: 08-23-2010, 12:26 AM -
Upgrading control hardware - Emco
By eDudlik in forum CNC (Mill / Lathe) Control Software (NC)Replies: 21Last Post: 12-08-2009, 07:52 AM -
v2xt post
By jrrhotrod in forum Post Processors for MCReplies: 25Last Post: 12-11-2008, 12:20 AM -
Continued post help for Prototrak DPM
By Shadowfaxx in forum MastercamReplies: 3Last Post: 11-04-2004, 09:16 PM -
Need post help for a Prototrak DPM-V3
By Shadowfaxx in forum Post Processors for MCReplies: 7Last Post: 11-01-2004, 10:21 PM
Posting Permissions
